News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

ibutton

Started by Seight-v8, August 04, 2025, 07:18:22 PM

Previous topic - Next topic

Seight-v8

Hello All,

Been away for around 5 years now....car still in the garage....but a divorce didnt help....lol

Anway went to start the beast and the immobiliser has fried....so I've taken it out and the car starts fine....

But is the ibutton feature of the ecu worth thinking about?

Looks like i dont have the chip on the board either.

Has anyone successfully used it for this....or is it a waste of my time?

thanks
scott

Engine:Rover V8 4600cc
Vems Firmware:V1.2.38, GPS, SDcard, LCD & Dual lambdas, Wasted spark, 36-1 trigger, Cam Sync & Bluetooth serial.

http://www.vems.hu/wiki/index.php?page=MembersPage%2FScottRichmond