« previous next »
Pages: [1]

Author Topic: VEMS LCD Display issues  (Read 8157 times)

Offline billman

  • Full Member
  • ***
  • Posts: 223
  • BHP: 2
VEMS LCD Display issues
« on: November 09, 2011, 10:43:18 am »
High i have an issue with the display. When i make a run at full throttle it distorts the displayed values and shifts everything 1-2 places to the left. After some time 3-5 minutes it comes back to normal.

When on cruise I almost never have issues with it.

Is there a way to make it stop and maybe make the display refresh faster?
Logged

Offline rossi46numberone

  • Full Member
  • ***
  • Posts: 125
  • BHP: 4
Re: VEMS LCD Display issues
« Reply #1 on: December 30, 2011, 09:22:57 pm »
Hi,
I have the same issue but till today I didn't find a solutions....


Michele.
Logged

Offline billman

  • Full Member
  • ***
  • Posts: 223
  • BHP: 2
Re: VEMS LCD Display issues
« Reply #2 on: February 06, 2012, 11:22:29 am »
As you see in 3 months no one had an idea.
Logged

Offline GintsK

  • Hero Member
  • *****
  • Posts: 1257
  • BHP: 50
Re: VEMS LCD Display issues
« Reply #3 on: February 06, 2012, 08:18:33 pm »
If you have PS/2 firmware, try speed sensor f/w instead.

Gints
Logged

Offline Sprocket

  • Hero Member
  • *****
  • Posts: 867
  • BHP: 29
Re: VEMS LCD Display issues
« Reply #4 on: February 10, 2012, 06:29:26 pm »
LCD can be tempremental at the best of times.

Things to try.

Ground the shield on the cable or DSUB body (sensor ground)
Fit a choke to the LCD cable.
Increasethe cable delays in Vemstune
Logged

Offline MWfire

  • Hero Member
  • *****
  • Posts: 721
  • BHP: 35
Re: VEMS LCD Display issues
« Reply #5 on: February 12, 2012, 12:48:15 pm »
Use better spark plug cable or use shielded cable for lcd.
Logged
Pages: [1]
« previous next »