« previous next »
Pages: [1]

Author Topic: Changing ignition system  (Read 5869 times)

Offline reevio

  • Jr. Member
  • **
  • Posts: 72
  • BHP: 1
Changing ignition system
« on: December 31, 2011, 06:17:09 pm »
Right I'm changing my ignition system back from a coil pack with wasted spark back to the standard coil and dizzy setup what do I need to change software wise via vems tune as il be changing the wiring slightly
Logged

Offline andreNL

  • Full Member
  • ***
  • Posts: 122
  • BHP: 8
    • My Wiki membersPage
Re: Changing ignition system
« Reply #1 on: December 31, 2011, 10:50:41 pm »
Connect one wire to the coil and set all ignition table settings to use that singels gate. Isolate the other wires carefully
Logged

Offline reevio

  • Jr. Member
  • **
  • Posts: 72
  • BHP: 1
Re: Changing ignition system
« Reply #2 on: January 01, 2012, 01:51:09 am »
Thanks il give that a go
Logged

Offline reevio

  • Jr. Member
  • **
  • Posts: 72
  • BHP: 1
Re: Changing ignition system
« Reply #3 on: January 03, 2012, 10:14:16 pm »
Right I've literally changed the wiring using 12+v and way 35 on the ec36 changed the software on vems tune to run 1 channel using that port is this correct as can't test yet as waiting on a new set of ignition leads
Logged

Offline andreNL

  • Full Member
  • ***
  • Posts: 122
  • BHP: 8
    • My Wiki membersPage
Re: Changing ignition system
« Reply #4 on: January 05, 2012, 08:13:01 am »
yes perfect  ;D
Logged

Offline reevio

  • Jr. Member
  • **
  • Posts: 72
  • BHP: 1
Re: Changing ignition system
« Reply #5 on: January 05, 2012, 08:29:39 am »
Cheers bud just waiting on new coil now
Logged
Pages: [1]
« previous next »