ABZ 4.2 into a 90CQ

[wabtheking]

hi
been doing this project for about 2years, but not very quickly!!!

looking at using a vems ecu, problem is i know nothing about ecu programming etc,

the mechincal side of things is near completion so i need to start at looking at ecu's etc

anyone care to point me in the right direction?

any help appreciated

cheers
will

[[email protected]]

More Audi people on here.

Theres no programming needed with the VEMS, if you buy through any of the VEMS Value Added Resellers you'll get a tested and configured setup for your engine.  If we've not done your particular engine then there might be a few minor setup issues, but they're never usually a significant problem.

Have you any specific questions or are you looking for a starters guide?

[wabtheking]

hilly has pm'd meand kindly offered to help,

got some pictures somewhere which i will post up when i find them

and i will keep this thread running with my progress

cheers
will