Author Topic: custom ht leads for an sr20det  (Read 5445 times)

Offline ex-ctr

  • Jr. Member
  • **
  • Posts: 35
  • BHP: 1
custom ht leads for an sr20det
« on: February 18, 2007, 10:05:47 am »
i need to find some where to get some ht leads made up or a set from another car that will fit with long reach plug connectors one end and Bosch coil pack connectors the other, anyone know where to get them from or a pre-made set from another car that could be made to fit :)

Offline [email protected]

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: custom ht leads for an sr20det
« Reply #1 on: February 18, 2007, 10:47:54 am »
I've been meaning to give these people a shout:
http://www.performanceleads.co.uk/

You might get what you need from:
http://www.vehicle-wiring-products.co.uk/VWPweb2000/HTleads/HTleads.html

Offline ex-ctr

  • Jr. Member
  • **
  • Posts: 35
  • BHP: 1
Re: custom ht leads for an sr20det
« Reply #2 on: February 18, 2007, 11:27:08 am »
great link, found these, almost the same engine :) http://www.performanceleads.co.uk/ImageDetails.asp?id=166

Offline [email protected]

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: custom ht leads for an sr20det
« Reply #3 on: February 18, 2007, 06:19:25 pm »
Its got to be worth asking them to measure them up for you.

No doubt that the Bosch coil pack is known to them too - apparently its the same terminals as some of the Alfa Romeo Twin sparks.

Offline dnb

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 837
  • BHP: 19
Re: custom ht leads for an sr20det
« Reply #4 on: February 19, 2007, 09:05:10 am »
I bought the stuff from Vehicle Wiring Products and made my own up.  They work nicely.  However I don't remember if they stock the long reach plug connections...