« previous next »
Pages: [1]

Author Topic: fuel pump output problem  (Read 4538 times)

Offline Duveit

  • Jr. Member
  • **
  • Posts: 8
  • BHP: 0
fuel pump output problem
« on: September 30, 2015, 11:59:10 pm »
When i connect the fuel pump rele to EC36 pin 15 the pump is priming, but when i start the care the rele turns off.

Am i missing a setting or do i need to use a output with more amps?

v3 ecu
Logged

Offline mattias

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1075
  • BHP: 41
    • Sävar Turbo Site
Re: fuel pump output problem
« Reply #1 on: October 01, 2015, 12:03:39 am »
No rpm/trigger = no fuel pump output active.
Logged

Offline Duveit

  • Jr. Member
  • **
  • Posts: 8
  • BHP: 0
Re: fuel pump output problem
« Reply #2 on: October 01, 2015, 12:24:30 am »
Well the car starts and runs for some seconds before it stops, so it should have rpm/trigger signal
Logged

Offline mattias

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1075
  • BHP: 41
    • Sävar Turbo Site
Re: fuel pump output problem
« Reply #3 on: October 01, 2015, 01:03:24 am »
I would use a DMM and verify everything.
Logged
Pages: [1]
« previous next »