« previous next »
Pages: [1]

Author Topic: Arduino LCD problem on VEMS V.3  (Read 3642 times)

Offline Audis6

  • Jr. Member
  • **
  • Posts: 12
  • BHP: 0
Arduino LCD problem on VEMS V.3
« on: December 27, 2015, 06:16:38 am »
my V.3 VEMS motronic55 been running great for years.recently i had a problem with my LCD.firstly
i guess my LCD was the culprit so i ordered the 20x4 Arduino replacement.at first attempt it seems
the LCD is working flawlessly then only backlight left on the display.sometime it's blanking on
2lines as you seen on my photos uploaded..I'm wondering if there's something wrong with my genboard.any procedures to check on this thing?








Logged

Offline Audis6

  • Jr. Member
  • **
  • Posts: 12
  • BHP: 0
Re: Arduino LCD problem on VEMS V.3
« Reply #1 on: December 27, 2015, 06:29:21 am »
Logged
Pages: [1]
« previous next »