« previous next »
Pages: [1]

Author Topic: another 325i turbo I installed VEMS on  (Read 9634 times)

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
another 325i turbo I installed VEMS on
« on: July 11, 2008, 04:11:43 pm »
It´s running the exact same setup as the red one.
apart from running a 4,1 or a 3,91 diff, which doesn´t suit AT ALL now.

It´s having some leak problems and will be sorted soon, it´s running 0,7bar at the moment.
Will recieve the same level as the red car when it´s sorted using boost control.

some pics, it´s HOT!!






Welded coolant channels










Me installing VEMS


He´s replacing the HX35 for a HX30 as his desired power level is not that high and he favours
low end boost.
Logged

Offline Turbos10

  • Jr. Member
  • **
  • Posts: 6
  • BHP: 2
Re: another 325i turbo I installed VEMS on
« Reply #1 on: July 16, 2008, 04:23:47 am »
Why not replace with an HY35W?  The 9cm turbine housing would spool lightning fast and still have the higher capability of the larger compressor.
Logged

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Re: another 325i turbo I installed VEMS on
« Reply #2 on: July 16, 2008, 01:46:47 pm »
He got a HX30 for $200 so hard to say now.

We also don´t have junkyards with these in so it´s all ebay bought anyway.
Logged

Offline gox

  • Full Member
  • ***
  • Posts: 198
  • BHP: 6
Re: another 325i turbo I installed VEMS on
« Reply #3 on: July 25, 2008, 03:49:03 pm »
Want to share Ignition Table? :)
Logged
E30 2.7 - VEMS,KKK K27.2,Schrick,1bar

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Re: another 325i turbo I installed VEMS on
« Reply #4 on: July 27, 2008, 04:42:40 am »
http://www.e30tech.com/forum/showthread.php?t=33028

You should definitely take a look at that forum.
It is the one stop for information about E30 turboing.

Logged

Offline [email protected]

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: another 325i turbo I installed VEMS on
« Reply #5 on: July 28, 2008, 04:17:46 pm »
IXer's big-up for the forum is handy, external links boost the google ranking.
Logged

Offline gox

  • Full Member
  • ***
  • Posts: 198
  • BHP: 6
Re: another 325i turbo I installed VEMS on
« Reply #6 on: July 30, 2008, 03:31:00 pm »
Quote from: gunni on July 27, 2008, 04:42:40 am
http://www.e30tech.com/forum/showthread.php?t=33028

You should definitely take a look at that forum.
It is the one stop for information about E30 turboing.


hehe i know ;) my nickanem overthere is Soopa ;)
i still have problems with knock,i dont know what to do...i`m a little skeptic about retarding the ignition more and more :( i started it with iXer's map and it starded detonating at 150kpa and above in higher gears,i retarded it a 4deg and its still detonating.... :(
Logged
E30 2.7 - VEMS,KKK K27.2,Schrick,1bar

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Re: another 325i turbo I installed VEMS on
« Reply #7 on: July 31, 2008, 01:47:55 am »
Post your map and post your base timing config.
into a new thread. I´ll try and give you my opinion.



Logged

Offline gox

  • Full Member
  • ***
  • Posts: 198
  • BHP: 6
Re: another 325i turbo I installed VEMS on
« Reply #8 on: July 31, 2008, 03:37:20 pm »
Logged
E30 2.7 - VEMS,KKK K27.2,Schrick,1bar
Pages: [1]
« previous next »