« previous next »
Pages: [1]

Author Topic: Trigger wheel config  (Read 5909 times)

Offline Sprocket

  • Hero Member
  • *****
  • Posts: 867
  • BHP: 29
Trigger wheel config
« on: March 24, 2007, 11:22:50 pm »
Just a quickie on this one.

What is, how do I determine, and does it matter to me, the setting for 'Crank Min. Period (usec)' 'Tooth Relation Normal' 'Tooth Relation Missing'

Also, 'Number Of Teeth On Wheel' is this actual teeth (36 - 1 = 35) or virtual teeth (35 + 1 = 36)??
Logged

Offline dnb

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 837
  • BHP: 19
Trigger wheel config
« Reply #1 on: March 25, 2007, 12:44:10 am »
Number of teeth is actual teeth IIRC.   Crank min period = 60/maximum_RPM
Logged

Offline Sprocket

  • Hero Member
  • *****
  • Posts: 867
  • BHP: 29
Re: Trigger wheel config
« Reply #2 on: April 02, 2007, 11:34:03 pm »
Quote from: dnb on March 25, 2007, 12:44:10 am
Number of teeth is actual teeth IIRC.   Crank min period = 60/maximum_RPM

Im afraid that this is incorrect. The last part of the equasion is missing.

http://www.vems.hu/manual/html/ch09.html#Detailed.Sensor.RPM.Config


Crank Min Period is calculated as follows

60/ (max RPM +1000)/Number of engine events * 2

LOL spent about an hour just trying to get a resonable value and then finding the correct info ::) ;D

No worries ;)
« Last Edit: April 03, 2007, 12:11:44 am by Sprocket »
Logged
Pages: [1]
« previous next »