« previous next »
Pages: 1 [2]

Author Topic: Seven replica with 1.8T-20V  (Read 16105 times)

Offline MWfire

  • Hero Member
  • *****
  • Posts: 721
  • BHP: 35
Re: Seven replica with 1.8T-20V
« Reply #15 on: February 02, 2010, 04:43:02 am »
do you have thicker head gasket or compression is 12.3:1 ?
Logged

Offline Morty

  • Jr. Member
  • **
  • Posts: 32
  • BHP: 4
Re: Seven replica with 1.8T-20V
« Reply #16 on: February 02, 2010, 03:16:15 pm »
Compression is 12,3:1.
Logged

Offline MWfire

  • Hero Member
  • *****
  • Posts: 721
  • BHP: 35
Re: Seven replica with 1.8T-20V
« Reply #17 on: February 02, 2010, 04:01:15 pm »
Quote from: Morty on February 02, 2010, 03:16:15 pm
Compression is 12,3:1.
what fuel do you use? Can you send me spark map ?
I'm doing engine with 10.8:1 compresion and turbo, so i'm curious about your setup.
Logged

Offline Morty

  • Jr. Member
  • **
  • Posts: 32
  • BHP: 4
Re: Seven replica with 1.8T-20V
« Reply #18 on: February 02, 2010, 04:13:50 pm »
My plan is to run either 99 octane (if possible) or E85 (104 octane) if needed.

The engine is still being built and I have not done any mapping yet.

I will not have any turbo on this, so I guess there will be a significant difference between the two engines.

As soon as I have the engine up running I will post my spark table.
Logged
Pages: 1 [2]
« previous next »