VEMS Community Forum

Technical => Ignition => Topic started by: andreNL on August 28, 2010, 07:23:03 am

Title: mistake shorted IGBT channel 7
Post by: andreNL on August 28, 2010, 07:23:03 am

Now i dont have current on any output driver if switched on in vemstune
(igbt's fet's and lcd or misc channels), shorted without a load after soldring and powerup.
Vems version 3.2 with 1.1.78 firmware
cheers andre

Title: Re: mistake shorted IGBT channel 7
Post by: andreNL on August 28, 2010, 03:52:28 pm

I had time to check the pcb today,
it appears the short is made through the cooling plate
mounted to the chassis.  ???
should be normal i suppose,

Title: Re: mistake shorted IGBT channel 7
Post by: Sprocket on September 02, 2010, 12:12:12 pm

There is suposed to be an insulator sheet under all the IGTB/ FET devices for this reason. If you do not have this, it might just be a simple matter of installing some.

http://shop.vems.hu/catalog/ignition-driver-insulator-sheet-p-75.html