VEMS Community Forum
Technical => Fuel Injection => Topic started by: Nicos on October 08, 2018, 12:46:21 pm
-
Hello,
i have a problem with fuel cut.
When i ride with the car, whatever the engine speed, when i release the TPS at 0 the fuel is cut and as long as i do not accelerate he remains cut off and necessarily it becomes lean after a few seconds.
My Overrun Fuelcut
-Fuelcut below: 10kpa
-Fuelcut RPM: 2100rpm
Fuel resume RPM: 1800rpm
Fuelcut delay: 0,1s
My MAP pressure does not drop below 14kpa
??? :-\
Thanks
Nicos
-
Can you please upload a log to the report center?
https://www.facebook.com/groups/vemsusers/permalink/1680520365368238/