VEMS Community Forum

VEMS => Software => Topic started by: Gabriel on May 09, 2017, 11:08:34 pm

Title: Cannot leave boot mode
Post by: Gabriel on May 09, 2017, 11:08:34 pm

i bought an used VEMS v3 with 1.1.88 fw inside and i cant establish connection.
after i set up the com port i have ECU found message but after press OK button i have Cannot leave boot mode Warning message...

Can anybody help me please?

Title: Re: Cannot leave boot mode
Post by: Gabriel on May 10, 2017, 12:18:09 am

Now i successfully loaded newest FW 1.2.31 but nothing changed...