VEMS Community Forum

Technical => Ignition => Topic started by: chencho16000 on August 13, 2009, 12:46:24 am

Title: Spark problem.????
Post by: chencho16000 on August 13, 2009, 12:46:24 am

My Vems has Option 4 + 4, four high current channels and 4 logic level.
I use EC36 pin 34 and Ec36 pin 36 with a two coil ( 4 cylinder wasted spark ).
 When engine started only work 2 cylinders, only spark 1 coil. ???
 It can be a configuration problem?
 It may be that it affects a shift light?

  Thank you!   

Title: Re: Spark problem.????
Post by: gunni on August 13, 2009, 05:55:16 am

Maybe moving the faulty coil wire to another high current output and configure the vems for that output and see what happens?