VEMS Community Forum
Technical => Fuel Injection => Topic started by: Matus on September 17, 2017, 10:03:26 am
-
HI,
Where I can set/turn off Deceleration fuel cut ?
-
Overrun / Safety
Its the overrun fuelcut settings
-
Overrun / Safety
Its the overrun fuelcut settings
Thanks, I have think that it is it .. but it wasn't working ... I have 11000 Fuelcut and 11500 fuelcut resume ... but if I got it correctly .. this is not all I suppose....
I would set 0% TPS VE table row with more fuel in higher RPMs :D