VEMS Community Forum
Technical => Fuel Injection => Topic started by: se7ensport on September 11, 2012, 08:44:57 pm
-
Need to double check this, I use 15.9 Ohms injectors:
- Is the on board 30V flyback sufficient/correct for them?
- Additionally with my old ecu I didn't have on board flyback and had a T.S. Diode from pin 23 within the wiring loom, please confirm that this should be removed due to the onboard flyback.
Thanks
Alex
-
Sufficient.
Use one 30V diode. At pin 23 directly connect injector supply.
Gints