VEMS Community Forum

Technical => Wiring & Sensors => Topic started by: ScareMercy on October 18, 2018, 01:10:11 pm

Title: Wheel speed input
Post by: ScareMercy on October 18, 2018, 01:10:11 pm

Hello,

I am building my VEMS in a Mercedes W124 and I'm wondering if my VEMS (V3.8 ) can cope with the standard ABS ring (it has 100 teeth). I am going to use the VEMS VR to HALL converter and use it's build in divider by 8. I am worried though that dividing by 8 is not going to be sufficient because 100/8=12,5 teeth per rotation. I read on several places the max teeth per rotation is 10.

Is there any easy solution for this, or is it not going to be such a big issue?

Thanks is advance,

Cheers.

Title: Re: Wheel speed input
Post by: MWfire on October 18, 2018, 10:44:37 pm

No problem with that.