VEMS Community Forum

Technical => Solenoids => Topic started by: gunni on January 14, 2012, 10:28:46 am

Title: Bosch 3 wire idle control valve
Post by: gunni on January 14, 2012, 10:28:46 am

I had a look at a stock motronic setup and the duration of both sides of the control is 10ms, so 100Hz would be the correct frequency for this solenoid.

Title: Re: Bosch 3 wire idle control valve
Post by: stroft on January 15, 2012, 11:25:04 am

Good to know !

Title: Re: Bosch 3 wire idle control valve
Post by: GintsK on January 15, 2012, 07:47:38 pm

control pulse or control period?

Title: Re: Bosch 3 wire idle control valve
Post by: gunni on January 15, 2012, 08:05:30 pm

The joint control period for both sides was 10ms.

i.e 50% duty was 5ms on one side, 5ms on the other.