VEMS Community Forum
Technical => Triggering => Topic started by: irishtwincam on February 21, 2007, 01:55:43 pm
-
http://www.vems.hu/wiki/index.php?page=VehicleFitment%2FToyota
Traces taken from here...
My distributor being turned over ona test bench.
http://www.vems.co.uk/VEMSTrigger/24+4BenchLog.txt
My distributor turning over in car with stock wiring.
http://www.vems.co.uk/VEMSTrigger/24+4InCarTrig.txt
I would like to graph these logs to show the 24 plus 4 pulses.
Can the values in the texst files be interpreted in such a way?
Can anyone help me with this?
(http://www.skynet.ie/~eireae86/tech/JDM%204age%204toothG%20whel%20with%201%20Gsensor%20and%2024toothNE%20wheel.jpg)
Images of 4A distributors (primary triggers)
http://www.skynet.ie/~eireae86/tech/4AGE%20Distributor%20Pics.zip
Early 4age has 4tooth G and 24tooths Ne
20v, late model 16v and GZE have 1or2 tooth G wheels (with two pickups) and a 24 tooth Ne.
Forgive the aweful pictures, they were taken on an old Panasonic X700 I was stuck with :(
NOTE:
According to what Ive read, the above trace will only have the 24 pulses over time.
With each pulse being a reduction in time, in the third column.
So low values within a certain threshold represent tooth pulses, everything else is ignored??