VEMS Community Forum

VEMS => Software => Topic started by: Ny_a560 on January 17, 2022, 12:46:18 AM

Title: Strain gauge shifter wiring
Post by: Ny_a560 on January 17, 2022, 12:46:18 AM
Hi has anyone set up a strain gauge using the v3 standalone. Anyone have any info or wiring diagram on how. Which wires on the harness they used. The car is a vr6 turbo with a plug and play harness. I know i need to add wire to the harness just don't want to make an error. Thank you
Title: Re: Strain gauge shifter wiring
Post by: Kamuto on January 24, 2022, 11:57:25 AM
Quote from: Ny_a560 on January 17, 2022, 12:46:18 AM
Hi has anyone set up a strain gauge using the v3 standalone. Anyone have any info or wiring diagram on how. Which wires on the harness they used. The car is a vr6 turbo with a plug and play harness. I know i need to add wire to the harness just don't want to make an error. Thank you
any analog input, and to properly use it it would be nice to have newer fw.. vems itself never released p&p vr6 harness so you need to check your pinout if you have one.