dear friends;
I have an Audi now with 4 wired coil 1.8T APY engine, I decided to make conversion harness for this car.
And plugged a vems which removen from AGU coded engine (3 wired Coil and with ICM delete).
Audi has an APY engine which have Electronic Throttle Body and 4 wired Cop coils.
I have removed the electronic throttle body and turned the throttle same as AGU engines.
Conversion harness looking great, RPM, IAT, CLT, etc. everything is working.
But 4 wired coils not working. How can i made it work. I have see the Engine control relay, 12v of coils supply by it. Activated it. But still no spark ignition.
Can you help me about this issue,
What must i change on settings?
Can you send me a wiring diagram if anyone use vems with 1.8T which have new type (me7) ecu.
Thanks so much.
On vems, I am using pins EC36-34, 10, 24 and 36 for the ignition.
Secondary trigger is looking disable on settings.
What must i do to active cam sensor?
I have worked car via stepper. Running but like 3 cylinder; what primary and secondary trigger settings and ignition output settings must be?
can anyone help me about this issue.
Please post your relevant settings so we may be able to spot problems.
if you want you can connect to my pc and check them. I don't know how can i export the settings.