hello all,
So been browsing the wiki for a while trying to find out what i actually need in the way of pulses/triggering to get cam sync working correctly.
So far i have a cam sprocket with 4 slots in....which i am looking to modifiy to use the cam sync.
I have a VR sensor that works.
But i am struggling to find/understand the VEMS configuration/setup of whats required to make it work.....
Ie do i need one pulse or four for the V8 engine, and how do i tell the vems when its to fire the injector.....hmmm so many unanswered questions.
anyone care to point me to some understandable information.
cheers
scott
One pulse will be fine, all it does is reset the trigger sequence when the trigger is seen.
You want to start off with a raw trigger value of 25 (0x19)