VEMS Community Forum

VEMS => Software => Topic started by: peter_jensen on July 25, 2010, 04:45:11 AM

Title: ego correction is on and off all the time
Post by: peter_jensen on July 25, 2010, 04:45:11 AM


Today I made a log of a Volvo 5t but I due not understand why ego correction is on and off all the time so if someone could take a look of the log and tell me why ?

http://www.vems.hu/files/PeterJensen/volvot5/v3.3_n001475-2010.07.24-14.47.18.vemslog


TNX
Peter
Title: Re: ego correction is on and off all the time
Post by: Arvid on July 25, 2010, 08:04:00 AM
Quote from: peter_jensen on July 25, 2010, 04:45:11 AM


Today I made a log of a Volvo 5t but I due not understand why ego correction is on and off all the time so if someone could take a look of the log and tell me why ?

http://www.vems.hu/files/PeterJensen/volvot5/v3.3_n001475-2010.07.24-14.47.18.vemslog


TNX
Peter


Try swapping the Acceleration Enrichment from pressure based to throttle based. Acceleration enrichments turns the ego correction off.  ;)

Also maybe Acceleration Dotrate vs. Scale [%] scales the wrong way, Try to switch Acceleration Dotrate vs. Scale [%] from 50-45-40-20. of 20-40-45-50.
Title: Re: ego correction is on and off all the time
Post by: peter_jensen on July 25, 2010, 09:20:05 AM
Thanks for fast reply


The wires are crossed to tps so maybe the table have to be in Otherwise detection bot I will change the connections.

Have overlooked map/tps configurations.

TNX
Peter