Print Page - VAG 1.8t AEB Injector Opening Time

Title: VAG 1.8t AEB Injector Opening Time
Post by: Jim_W on January 31, 2011, 12:34:10 AM

Anyone have good injector latency (Injector open time @ 13.2V) settings for VAG 1.8t AEB injectors? Bosch part number 280 150 447, 210cc/min.

Thanks

Title: Re: VAG 1.8t AEB Injector Opening Time
Post by: GintsK on January 31, 2011, 06:59:37 PM

look here. http://www.usrallyteam.com/content/products/injector/Bosch_Injector_data.xls
with no lag in 2.5ms it would inject 7mg in 2.5ms
practically - 5.63mg

5.63mg relates for 2.011ms if lag is subtracted.
So lag time becomes 2.5-2.011=489us
But: it is 1) for 300KPa 2)for unknown (I suppose higher) flyback voltage. 3) unknown voltage

Title: Re: VAG 1.8t AEB Injector Opening Time
Post by: Jim_W on January 31, 2011, 09:59:53 PM

Excellent. Thanks.

How did you find the 2.011ms and 7mg figure? Are there better descriptions of of the column titles anywhere? What is "g/1000 Imp."? Grams per thousand... what?

This is a good starting point even though I'll be turning the pressure up to 4 bar.

Title: Re: VAG 1.8t AEB Injector Opening Time
Post by: GintsK on February 01, 2011, 04:50:05 PM

Grams per 1000x2.5ms pulses.
I calculated static grams per 1000x2.5ms=2.5s. And so find dead time. But it is just for reference.

VEMS Community Forum

Technical => Fuel Injection => Topic started by: Jim_W on January 31, 2011, 12:34:10 AM