Text only | Text with Images

VEMS Community Forum

Technical => Wiring & Sensors => Topic started by: pug106 on June 22, 2007, 08:52:34 PM

Title: How can i install oil pressure and fuel pres sensor?
Post by: pug106 on June 22, 2007, 08:52:34 PM
hi
i am new user of VEMS v3.3
my car is 2001 peugeot 106?
Which pins i connect the sensors wires
is there special brand sensor which is working good with vems?
and has any one got pictures how can shown in software?
Title: Re: How can i install oil pressure and fuel pres sensor?
Post by: [email protected] on June 23, 2007, 08:19:47 AM
Hi,

VEMS does not monitor oil and fuel pressure for any engine function, if you want to monitor them for datalogging you can connect them to the spare Analog inputs on EC18 (6, 12 or 16):
(http://www.vems.co.uk/VEMSUserManual/ECConnectorsOut.png)
Title: Re: How can i install oil pressure and fuel pres sensor?
Post by: pug106 on June 25, 2007, 10:58:11 AM
thanks
i'm going to try
Title: Re: How can i install oil pressure and fuel pres sensor?
Post by: dnb on June 25, 2007, 11:40:23 AM
Just a thought - is it possible to display these analig readings on the VEMS LCD, or is it datalog only?

Thanks
Title: Re: How can i install oil pressure and fuel pres sensor?
Post by: [email protected] on June 25, 2007, 12:31:03 PM
I think its datalog only and as its raw datalogging it will require some vems3.ini work in MegaTune to format the values into usable units.
Title: Re: How can i install oil pressure and fuel pres sensor?
Post by: dnb on June 25, 2007, 12:39:36 PM
Surely the work in MT is only applying the appropriate scale and offset parameters? 

Oh well, I guess it doesn't solve my lack-of-space problem on the TVR dash...

It looks like I'm going to have to put in another LCD and AVR to display what some of the gauge senders are up to and it would have been nice to have it combined with the VEMS display.
Text only | Text with Images