Print Page - Burned ATmega - is it possible?

Title: Burned ATmega - is it possible?
Post by: guzior on June 01, 2011, 03:43:21 PM

Hi.
I tune on Vems C20LET engine. Someone who made wiring put on analog in channel #5 12v with 460ohm resistor. Is it possible that by this VEMS was burned?

Title: Re: Burned ATmega - is it possible?
Post by: boostd audi on June 01, 2011, 08:38:10 PM

you can always test with a 5v .. tap off tps wire and test it

is this not an option?

Title: Re: Burned ATmega - is it possible?
Post by: MWfire on June 07, 2011, 09:40:21 AM

yes, you can burn a/d chip.
Replacment
http://shop.vems.hu/catalog/8channel-mcp3208-p-135.html

VEMS Community Forum

Technical => Wiring & Sensors => Topic started by: guzior on June 01, 2011, 03:43:21 PM