Text only | Text with Images

VEMS Community Forum

VEMS => Modifications and Repairs => Topic started by: billman on November 09, 2011, 10:43:18 AM

Title: VEMS LCD Display issues
Post by: billman on November 09, 2011, 10:43:18 AM
High i have an issue with the display. When i make a run at full throttle it distorts the displayed values and shifts everything 1-2 places to the left. After some time 3-5 minutes it comes back to normal.

When on cruise I almost never have issues with it.

Is there a way to make it stop and maybe make the display refresh faster?
Title: Re: VEMS LCD Display issues
Post by: rossi46numberone on December 30, 2011, 09:22:57 PM
Hi,
I have the same issue but till today I didn't find a solutions....


Michele.
Title: Re: VEMS LCD Display issues
Post by: billman on February 06, 2012, 11:22:29 AM
As you see in 3 months no one had an idea.
Title: Re: VEMS LCD Display issues
Post by: GintsK on February 06, 2012, 08:18:33 PM
If you have PS/2 firmware, try speed sensor f/w instead.

Gints
Title: Re: VEMS LCD Display issues
Post by: Sprocket on February 10, 2012, 06:29:26 PM
LCD can be tempremental at the best of times.

Things to try.

Ground the shield on the cable or DSUB body (sensor ground)
Fit a choke to the LCD cable.
Increasethe cable delays in Vemstune
Title: Re: VEMS LCD Display issues
Post by: MWfire on February 12, 2012, 12:48:15 PM
Use better spark plug cable or use shielded cable for lcd.
Text only | Text with Images