VEMS Community Forum

VEMS => Modifications and Repairs => Topic started by: kriskis on June 24, 2013, 11:15:47 AM

Title: retard ignition on 1 st gear
Post by: kriskis on June 24, 2013, 11:15:47 AM
I need turn on option to retard ignition on first gear who can do this for me ?
(http://[url=http://www.fotosik.pl/showFullSize.php?id=8253223b5ff7fe47%5D%5BIMG%5Dhttp://images41.fotosik.pl/2080/8253223b5ff7fe47m.jpg)[/URL][/img]

config
http://www.sendspace.pl/file/7614792979afb9f9366d261
Title: Re: retard ignition on 1 st gear
Post by: jrussell on June 24, 2013, 10:53:26 PM
Go to the Motorsports menu
Change "Anytrim mode" under Anytrim3 to spark corr
Change "Input control source" under Anytrim3 to "Speed 1 input" (or Speed 2 input if that's what you want)
Go to Motorsports -> Anytrim3 Curve and make it what you want based on road speed.

That's about as close as I can come to a 1st gear ignition adjustment at the moment.
Title: Re: retard ignition on 1 st gear
Post by: Erikk on June 27, 2013, 10:10:26 AM
If you want to retard e.g. 10deg of ignition on first gear:

Base Setup -> Gear or Speed dependent Spark retard.
Choost Gear dependent.
Advance Gears 2-6 by 10deg ( By putting -10 in the settings ).

Add 10deg to the primary trigger angle.



Then ign table is "correct" at gears 2-6, and retarded 10deg on first gear.


Modified config:

https://dl.dropboxusercontent.com/u/54390545/retarded.vemscfg