hello all,
So my vems was running fine, engine was idling in the garage, it went really lumpy and the engine cutout.
now no vems, no lcd, no fuel pump and engine wont start.
Disconnected everything and tried a few times, but nothing, all fuses ok in the wiring, and everything else in the car is fine...
Anyone point me where to go next.
thanks
scott
12v to the ecu is there?
all grounds are there?
no bad smell of the ecu?
yes found the problem was a loose connection on the inside of the car loom fuse box to one of the fuses....now my vems is working again.
Always the simple ones that are the hardest to find.....just hope it doesn't happen while I am driving the car.
cheers
scott