what will be normal values on map corr table , have heard that 110-120 can be max values but in my setup there is upto 130
(http://www.upload.ee/image/4792395/mapcorr.png)
The proper way is to tune the main VE table at min boost, then adjust map corr table at any higher boost. usually values are 100 or slightly more.
i found that 1-3 gear without boost my lambda was 0.72-0.78 so i decided to tune tps map down , and after that i needed to tune mapcorr table to bit higher .
i have 260-300kpa boost .