VEMS Community Forum
Technical => Solenoids => Topic started by: Duveit on September 30, 2015, 11:59:10 pm
-
When i connect the fuel pump rele to EC36 pin 15 the pump is priming, but when i start the care the rele turns off.
Am i missing a setting or do i need to use a output with more amps?
v3 ecu
-
No rpm/trigger = no fuel pump output active.
-
Well the car starts and runs for some seconds before it stops, so it should have rpm/trigger signal
-
I would use a DMM and verify everything.