Wondering if someone would be able to help me out with setting up the sec. trigger correctly.
12V VR6 w/ MK4 cams... so this means not the simple 1 window cam.
it has this:
(http://vr6parts.com/onlinestore/media/catalog/product/cache/1/small_image/300x/17f82f742ffe127f42dca9de82fb58b1/i/m/img_7829.jpg)
Attached is a trigger log I took (although I do believe that there was an issue with the primary trigger - car ran but was kinda weird and didn't want to start right off the bat without a few pops - this has been corrected now by the installer/shop)
https://dl.dropboxusercontent.com/u/56237915/v3.3_u011107-2015-11-12-19.48.23.triggerlog
Thanks!
set secondary trigger to rising edge and make trigger log, then it should be different, and you will be able to use sec ignore options :)