Hi
I'm running a V3.3 from around 2010, serial no. 002613
Until now I haven't used the speed sensor, but now I want to try it out.
How do I find out if it's possible to make the wheelspeed sensor work, is it a standard feature on V3.3?
I guess I need a PS2 cable http://shop.vems.hu/catalog/wheelspeed-cable-p-143.html
Update: There is no ps2 port on my V3.3!
Advice is appreciated! :D
Regards, Leif-Helge
http://imgur.com/a/vhAJh
See pictures in link, you need to make small pcb 6x4
I think black wire is wheelspeed in that goes to ec18 connector, use DVM to verify.
Or buy ps/2 cable with connector to plug inside vems.
Try to search forum for wheelspeed and speed sensor
I have it like this and i works good. just connected wire from my dash to vems.
Ok, thanks for the pointers! :)
you just need 2 resistors and one diode to be soldered in to vems :) that's all :) nothing more