VEMS Community Forum

Members => Projects & Installs => Topic started by: Big simer on January 29, 2018, 02:32:13 AM

Title: Vems raw-52 install
Post by: Big simer on January 29, 2018, 02:32:13 AM
I have a 84 rx7 gslse n want to watch my afr’s so I purchased the product . Was told by a friend I need to always be aware of my afr’s . My car comes with a 1 wire o2 sensor . I understand most of the wiring to the o2 but the other 2 wires from the gauge I’m alil unsure of . The one with the fuse (red) goes to constant battery or to ignition power? Now to the blue wire where does this one go? I’ve never installed a wideband before so I need all the help I can get. I was also told to wire in a relay to power, what’s ur thoughts?
Title: Re: Vems raw-52 install
Post by: Kamuto on January 29, 2018, 11:43:33 AM
Quote from: Big simer on January 29, 2018, 02:32:13 AM
I have a 84 rx7 gslse n want to watch my afr’s so I purchased the product . Was told by a friend I need to always be aware of my afr’s . My car comes with a 1 wire o2 sensor . I understand most of the wiring to the o2 but the other 2 wires from the gauge I’m alil unsure of . The one with the fuse (red) goes to constant battery or to ignition power? Now to the blue wire where does this one go? I’ve never installed a wideband before so I need all the help I can get. I was also told to wire in a relay to power, what’s ur thoughts?
you bought just gauge, or wideband and egt controller in the gauge?
Title: Re: Vems raw-52 install
Post by: gunni on February 02, 2018, 07:26:59 PM
Quote from: Big simer on January 29, 2018, 02:32:13 AM
I have a 84 rx7 gslse n want to watch my afr’s so I purchased the product . Was told by a friend I need to always be aware of my afr’s . My car comes with a 1 wire o2 sensor . I understand most of the wiring to the o2 but the other 2 wires from the gauge I’m alil unsure of . The one with the fuse (red) goes to constant battery or to ignition power? Now to the blue wire where does this one go? I’ve never installed a wideband before so I need all the help I can get. I was also told to wire in a relay to power, what’s ur thoughts?

The blue is ground
the fused goes to a switched 12v source.

Didn´t you get the paperwork in your box which details all of this?