Hi Everyone,
I was seeing if anyone has a good closed loop boost config for a audi 2.2L AAN running a gt2871r ? I am looking for good PID numbers and a good refDC Table vs boost target to go with it. I am also running the stock N75 valve. TIA!
Quote from: Durr McDanks on February 21, 2018, 09:38:37 PM
Hi Everyone,
I was seeing if anyone has a good closed loop boost config for a audi 2.2L AAN running a gt2871r ? I am looking for good PID numbers and a good refDC Table vs boost target to go with it. I am also running the stock N75 valve. TIA!
ref table depends on your wastegate spring size, and pid usually is 50 40 40 on my setups.
I am running the 034EFI 1.9 BAR Wastegate Spring on the stock waste gate.
Quote from: Durr McDanks on February 26, 2018, 06:36:54 AM
I am running the 034EFI 1.9 BAR Wastegate Spring on the stock waste gate.
if you have replaced 034 it with vems I would help you :D
Sorry, that was confusing on my part, I am running VEMS standalone. I just copy and pasted what 034 had on the website next to the external wastegate spring. I have a 034 wastegate spring rated at 1.9 BAR.
Best recommendation is to go through the work of setting up the PIDs, it shouldn´t take more than a couple of hours if the fuel and ignition is mapped already.
Here is a link to some info from a little thing I wrote and a forum post from way back.
https://sway.com/8OUxAzd6f-aZyFxI?ref=Link
https://1drv.ms/b/s!Agm0wZb6As7NqrRVFZZAUpPOUEjE5g