Where are the extra input chanels. how many and how can I use these, analogue? Digital?
EC36/18 pins, GenBoard hard wiring???
Again software/ Megatune.
Really I am looking for the digital input chanel for the ALS.
Rob has mentioned something about this requiring some resistors??
Remind me to take some pics of my VEMS - I have an extra 9 pin D connector with the extra AtoD & digital inputs already wired in. Don't remember the details, but they come from various header pins on the board.
Reminded ;D
Pictures would be good ;)
Ta Mucho
Bringing this back to the top ;D
Reminder for information ;)
I was hoping that the new style pin-out drawing would have been done so that it could be better illustrated.
all I could find on these inputs, Some what confusing as the Wiki seems to be :-\. Thi info is in there some where :)
http://www.vems.hu/wiki/index.php?page=GenBoard%2FUnderDevelopment%2FDigitalInputs
Sorry about the lack of response on this, I've written some wordage about the Analog inputs in the User Guide:
http://www.vems.hu/wiki/index.php?page=MembersPage%2FPhatBob%2FUserGuide
(Its near the bottom)
The wiring has been confirmed as:
(http://www.vems.co.uk/VEMSUserManual/ConnectingAnalogInput.png)
The input is pulled up to 5v through the 2k7 resistor, and when the button is pressed it is pulled down to 0v