Print Page - internal PCB wiring

Title: internal PCB wiring
Post by: jago on April 07, 2008, 10:51:43 PM

hello, i've been looking on the wiki and the forum and i cant find an internal wiring diagram.

i am trying to murge the orignal ecu pins with the vems however i need to know where all the fets and diodes go. also what pin of the 6 i need for the map sensor.

jago

p.s. i got the ecu today

Title: Re: internal PCB wiring
Post by: Denmark on April 08, 2008, 07:55:31 AM

Here you go,

Links to the best i have found:

http://www.vems.hu/files/genboardv3/assembly/vems_v3_documentation.pdf

http://www.vems.hu/files/MembersPage/PeterJensen/wems_hardwareinstall.doc

http://www.vems.hu/wiki/index.php?page=MembersPage%2FPhatBob%2FUserGuide

Youjust need to check that on the Peter page, some off the wiring is not the same as others!!

/Skassa

Title: Re: internal PCB wiring
Post by: [email protected] on April 08, 2008, 08:14:39 AM

Here's my build guide:
http://www.vems.co.uk/VEMS/

And GRM Racers Step-by-step guide:
http://www.vems.hu/wiki/index.php?page=StepByStepGuide

Title: Re: internal PCB wiring
Post by: jago on April 08, 2008, 04:31:51 PM

links are really good, except i am still none the wiser on what pin to use for offboard map sensor wiring.

i have got my ecu back from the rolling road, so i can now start to desolder the connectors and start to make a patch list of connections.

Title: Re: internal PCB wiring
Post by: Denmark on April 08, 2008, 05:18:36 PM

ItÃ,Â´s shown right here..

http://www.vems.hu/files/genboardv3/assembly/vems_v3_documentation.pdf

There is a internal wire from the signal place , and to EC18- pin6

/Skassa

Title: Re: internal PCB wiring
Post by: jago on April 08, 2008, 10:01:57 PM

i see it thank you.

VEMS Community Forum

Technical => Wiring & Sensors => Topic started by: jago on April 07, 2008, 10:51:43 PM