Text only | Text with Images

VEMS Community Forum

Technical => Fuel Injection => Topic started by: chencho16000 on April 20, 2008, 10:40:32 PM

Title: DON´T LOWER IDLE.
Post by: chencho16000 on April 20, 2008, 10:40:32 PM

BY WHERE I CAN MODIFY IT?
ALWAYS AROUND 1500 REV X MIN.
THANKS.
??? ??? ???
Title: Re: DON´T LOWER IDLE.
Post by: [email protected] on April 21, 2008, 08:36:26 AM
The idle control is in Extras->Idle Settings General You can use the simple on/off type which is a good idea to get things moving in the right direction.

First we need to check that the Idle Control Valve is functioning correctly.  Does it have a good power feed (measuring 12V), does the idle speed drop when you ground the activation wire?
Title: Re: DON´T LOWER IDLE.
Post by: chencho16000 on April 21, 2008, 09:53:41 PM
I use on/off type.
The idle control valve is functioning correctly.

When you say "is a good idea to get things moving in the right direction"...You talk about the regulating screw?
Title: Re: DON´T LOWER IDLE.
Post by: [email protected] on April 21, 2008, 10:07:34 PM
So when you activate the ICV by grounding what does the RPM drop to?

Which pin is your ICV connected to?

What are the Idle solenoid settings in Extras->Idle Settings General and the values in Settings->Injector Outputs
Text only | Text with Images