Text only | Text with Images

VEMS Community Forum

Technical => Wiring & Sensors => Topic started by: Riff on April 20, 2008, 11:11:12 PM

Title: Transient suppresion diode
Post by: Riff on April 20, 2008, 11:11:12 PM
Is the transient suppresion diode built-in or is it something that I have to add? And if I have to add it, does it come in the package when I order?
Title: Re: Transient suppresion diode
Post by: [email protected] on April 21, 2008, 08:38:24 AM
Hi, it all depends on what you ordered and from whom!

Are you buying the VEMS as components?  Or have you bought a built and tested system?
Title: Re: Transient suppresion diode
Post by: Riff on April 21, 2008, 09:28:28 AM
Bought it from [email protected]. I've tried emailing him, but no luck. He's such a busy man so I can understand that. :)

OrderId was 1972.
Title: Re: Transient suppresion diode
Post by: [email protected] on April 21, 2008, 11:34:53 AM
If I see him today I'll point him to this thread.
Title: Re: Transient suppresion diode
Post by: Riff on April 21, 2008, 04:58:29 PM
Cool. :)
And thanks for quick response.

Kurt
Title: Re: Transient suppresion diode
Post by: Jorgen on April 21, 2008, 10:35:53 PM
Hi,

All ECU's sold by me has the internal transient suppresion diode and the flyback should be connected like in this picture: http://www.phattransmissions.com/VEMSUserManual/ConnectingInjectors8.png

I have searched my email database for an email regarding the transient suppresion diode in the ECU part of order 1972 but didn't find any. But I did however find a mail asking about additional bosch connectors and I sent a delayed response to that email.

Jörgen Karlsson
Gothenburg, Sweden
Text only | Text with Images