Text only | Text with Images

VEMS Community Forum

Technical => Wiring & Sensors => Topic started by: mr_g on August 11, 2008, 06:34:25 PM

Title: Wiring new 20x4 LCD's from VEMS shop?
Post by: mr_g on August 11, 2008, 06:34:25 PM
This is something completely different... It has 2 connectors with 16pins... Did anybody connected this one?


(http://www.crystalfontz.com/phpthumb/phpThumb.php?id=508&w=430)
Title: Re: Wiring new 20x4 LCD's from VEMS shop?
Post by: [email protected] on August 11, 2008, 07:41:10 PM
Nope, never seen it before in my life.

I looked on the wiki and found this datasheet though: http://www.crystalfontz.com/products/2004k/datasheets/422/CFAH2004K-TMI_Data_Sheet_v0.0a.pdf
Title: Re: Wiring new 20x4 LCD's from VEMS shop?
Post by: gunni on August 11, 2008, 10:01:32 PM
IÃ,´ve gotten a lcd like that to work.
canÃ,´t remember what directions it was but it worked perfect.
Title: Re: Wiring new 20x4 LCD's from VEMS shop?
Post by: mr_g on August 12, 2008, 08:01:17 AM
It seems that both connectors are the same... Why did they put 2? Maybe for orientation in installation... Anyway, connected it and will see today if it works...

Where can I connect PWM for LCD light?
Text only | Text with Images