Text only | Text with Images

VEMS Community Forum

General Category => General Discussion => Topic started by: Denmark on August 26, 2008, 04:59:33 PM

Title: were to get a Motronic 68pin ecu connector
Post by: Denmark on August 26, 2008, 04:59:33 PM
Hi all,

IÃ,´m going to make a Golf Vr6 turbo 92Ã,´ with a Vems, and would like to know if any of You know, were i can get a ECU connector so i can make a pnp VEMS,
The VR6 is using a 68pin connector.

any info on were i can buy one?

Thanks,
Skassa
Title: Re: were to get a Motronic 68pin ecu connector
Post by: Denmark on August 29, 2008, 10:16:42 AM
I got it ;)


/Skassa
Title: Re: were to get a Motronic 68pin ecu connector
Post by: [email protected] on August 29, 2008, 11:01:34 AM
Going to tell us where from?
Title: Re: were to get a Motronic 68pin ecu connector
Post by: Denmark on August 29, 2008, 11:30:02 AM
Sorry,

I did not get the connector only, but found a complete Golf 3 TDI ecu, i have then butchered that, to get the plug,
The great part is, that the complete end is almost a perfect fit on the vems case, so this will make for a nice pnp ecu..

/Skassa
Title: Re: were to get a Motronic 68pin ecu connector
Post by: lugnuts on December 02, 2008, 12:16:54 AM
Oops, I have not been around in a while. I have been making these for most of the year. It works very well and I have been getting requests for them.

(http://www.vems.hu/files/KevinBlack/front.jpg)
Text only | Text with Images