Print Page - ego correction

Title: ego correction
Post by: se7ensport on October 04, 2008, 02:57:54 PM

Beginning to get some promising results, I want to start using EGO correction to speed things up but don't know how to turn it on, my EGO settings are below:

(http://www.locostbuilders.co.uk/upload/EGO%20settings.jpg)

I've tried setting EGO NB02 connected and EGO NB02 PID config to enabled individually but EGO remains OFF at the bottom of the megatune screen, what am i missing?

Thanks

Alex

Title: Re: ego correction
Post by: Bat on October 04, 2008, 04:18:37 PM

Hi,
Try enabling WB feedback?
Cheers
Gavin :)

Title: Re: ego correction
Post by: MWfire on October 04, 2008, 05:12:36 PM

try step size 5%.

Title: Re: ego correction
Post by: se7ensport on October 04, 2008, 11:54:38 PM

Setting the step size did it.

Thanks

VEMS Community Forum

VEMS => Calibration & Mapping => Topic started by: se7ensport on October 04, 2008, 02:57:54 PM