VEMS Community Forum

Technical => Wideband & EGT Gauge => Topic started by: perboddum on June 15, 2018, 06:31:42 PM

Title: EGO correction turns off with no reason
Post by: perboddum on June 15, 2018, 06:31:42 PM
Hi

For no apparent reason my EGO correction turns off at WOT.
No accell enrichment is active and throttle pot is stable at 100%.

At part throttle EGO correction works fine.
Please look at the logfile http://www.vems.hu/files/perboddum/ego1.vemslog (http://www.vems.hu/files/perboddum/ego1.vemslog)
EGO correction turns ON after accell is done and then EGO correction turns suddenly OFF

I have been through my config file and cannot see anything that should stop the EGO correction from working.

I have attached 2 logfiles.

http://www.vems.hu/files/perboddum/ego1.vemslog (http://www.vems.hu/files/perboddum/ego1.vemslog)
http://www.vems.hu/files/perboddum/ego2.vemslog (http://www.vems.hu/files/perboddum/ego2.vemslog)

best regards
per andersen