Text only | Text with Images

VEMS Community Forum

Technical => Wiring & Sensors => Topic started by: Ellisd on February 07, 2009, 07:04:08 PM

Title: EGT probe to measure inlet air temp?
Post by: Ellisd on February 07, 2009, 07:04:08 PM
As titled, would this work? what's the range of the 6mm EGT probe? I'm wanting to do this as I'm not going to bother removing the manifold to tap it untill i get a new turbo, so was wondering if i could use the sensor to measure inlet temps instead of it sitting gathering dust?
Title: Re: EGT probe to measure inlet air temp?
Post by: gunni on February 07, 2009, 09:18:09 PM
It´s going to be slower then a normal MAT sensor
Title: Re: EGT probe to measure inlet air temp?
Post by: [email protected] on February 07, 2009, 11:27:18 PM
it measures as low as -50degC to 1200C IIRC
Title: Re: EGT probe to measure inlet air temp?
Post by: Ellisd on February 08, 2009, 03:05:48 AM
Worth a try me thinks  :D
Text only | Text with Images