Print Page - EXHAUST EMISSIONS ADVICE NEEDED

Title: EXHAUST EMISSIONS ADVICE NEEDED
Post by: 3.7 V8 on July 21, 2009, 04:52:48 AM

Hi,
Am after some advise on exhaust emissions for passing the MOT, have a VEMS install on an audi V8 and it runs sweet as nut, however I do not use catalitic convertors as the car its in is nearly 25yrs old, which means the tester used the old settings of max of 3,500 %vol CO, however the car was 5,697 :-\

Has anyone else had this problem, can a setting be changed to get it to lower the CO level,

Thanks any advise welcome p.s im no VEMS guru so please bare with it, many thanks regards danny

Title: Re: EXHAUST EMISSIONS ADVICE NEEDED
Post by: MWfire on July 21, 2009, 05:08:32 AM

On one car i put lambda 1.05 and CO was ~0.2% without catalic convertor. So you only need lean mixture.

Title: Re: EXHAUST EMISSIONS ADVICE NEEDED
Post by: 3.7 V8 on July 21, 2009, 05:31:10 AM

Thankyou for the quick response, pleased to find it can be ajusted on the VEMS , bring back the good old days when you could just ajust the screw ;D

Regards danny

Title: Re: EXHAUST EMISSIONS ADVICE NEEDED
Post by: dnb on July 26, 2009, 04:30:05 AM

Yes, lean out the mixture and you can achieve near zero CO. My TVR just passed it's emissions test (closed loop for catalyst vehicles) without having the cat fitted in the exhast :)

Title: Re: EXHAUST EMISSIONS ADVICE NEEDED
Post by: 3.7 V8 on July 27, 2009, 12:39:07 AM

Yep passed the MOT the other day after changing the required fuel level ;D

Cheers for all the info much appreciated ;)

VEMS Community Forum

VEMS => Configuration => Topic started by: 3.7 V8 on July 21, 2009, 04:52:48 AM