Print Page - Vr6 12v mk4 camshaft sensor settings

Title: Vr6 12v mk4 camshaft sensor settings
Post by: nevaeh speed on May 08, 2021, 02:32:04 AM

Trying to get a car running full sequential ignition, and it's running a multi window camshaft window froma 1999.5-2001 mk4 vr6. Tried doing cam sync but still no fire. Window is similar to 24v vr6 windows 2002-2005.

(https://i.ibb.co/k8nz5BL/133264-x800.webp)

(https://i.ibb.co/6NCjkfs/unnamed-1.jpg)

Title: Re: Vr6 12v mk4 camshaft sensor settings
Post by: 299vr6-t on June 13, 2021, 01:12:49 PM

You need these sec.trigger settings:

mode: CAM SYNC
Edge: Rinsing

Ignore Sectrig Pulses above: 15
Max. primary edge between sec. triggers: 30

VEMS Community Forum

Technical => Ignition => Topic started by: nevaeh speed on May 08, 2021, 02:32:04 AM