VEMS Community Forum

VEMS => Software => Topic started by: BigD on October 25, 2013, 04:19:10 am

Title: VemsDisplay - gauge descriptor editing, warning light
Post by: BigD on October 25, 2013, 04:19:10 am

Guys, any plans to release a version of vemsdisplay with a descriptor editor like for normal VT? I am converting the car to eliminate the cluster and I have all the info inputs to the ecu but no way to show it nicely like oil pressure, fuel level. I'm limited to ADC calc gauges.

Also, could you add a feature to the gauges to change color, flash, illuminate a section of the gauge face, to act as a warning light for that gauge (oil pressure too low, low fuel etc)

(http://lh4.googleusercontent.com/-9zhnAa5S3n4/Ul8ke8O9QqI/AAAAAAAAEh4/ksp5qJiuhyw/s1024-no/IMAGE_130.jpg)

Title: Re: VemsDisplay - gauge descriptor editing, warning light
Post by: BigD on December 09, 2013, 07:03:12 pm

Bueller? Bueller?

Does anyone know of a development wiki showing upcoming features for the android app?

Title: Re: VemsDisplay - gauge descriptor editing, warning light
Post by: mads b (dk) on December 10, 2013, 11:27:21 am

I am also eager to know about it  :)

Title: Re: VemsDisplay - gauge descriptor editing, warning light
Post by: VEMS on March 06, 2014, 05:27:45 pm

New VemsDisplay version has just been released (3.2), for details see: http://www.vems.hu/android/

Most noticeable changes, ADC cal inputs are now correctly scaled also in VemsDisplay, using the same dataset as on VemsTune; ADC Cal channel names as selected in VemsTune is still pending but will follow soon.

More details on setting up ADC cal: http://vems.hu/vt/help/v3/v3_VemsDisplay_calibration.html

Best regards, Dave

Title: Re: VemsDisplay - gauge descriptor editing, warning light
Post by: BigD on June 25, 2014, 02:01:02 pm

Finally fired it up for the first time with the tablet dash! Working great, just waiting on an update to be able to change the analog gauge descriptors

https://www.youtube.com/watch?v=1JDNOI4nNDE

Title: Re: VemsDisplay - gauge descriptor editing, warning light
Post by: VEMS on July 18, 2014, 07:12:36 pm

Hello BigD,

New VemsDisplay released with some features that might interest you, more info: http://vems.hu/android/

Best regards, Dave

Title: Re: VemsDisplay - gauge descriptor editing, warning light
Post by: Thiago on May 11, 2020, 04:29:13 am

Hello, sorry for diging into this post. Does anyone know how to change the name for the ADC CALC gauge individually in VemsDisplay?

When i change in Gauge Description, it changes all gauges adc255 type... I wanted to name individually the ADC CAL gauges as for Fuel Pressure, Oil Pressure, Potentiometer, etc

Thanks in advance!