VEMS Community Forum

Technical => Solenoids => Topic started by: mr_g on August 04, 2017, 10:13:03 pm

Title: Possible pwm outputs? Etc low z and boost
Post by: mr_g on August 04, 2017, 10:13:03 pm

Is there any other pwm output beside oc0 for dbw or etc?
I don't want to lose low z pwm output.

Title: Re: Possible pwm outputs? Etc low z and boost
Post by: mr_g on August 05, 2017, 04:59:53 pm

Can I use oc1a or oc1b for DBW pwm?

Title: Re: Possible pwm outputs? Etc low z and boost
Post by: Kamuto on September 02, 2017, 02:12:41 pm

Quote from: mr_g on August 05, 2017, 04:59:53 pm

Can I use oc1a or oc1b for DBW pwm?

yes you can, build your own fw and use it :)) still cant see wiki page ;)

Title: Re: Possible pwm outputs? Etc low z and boost
Post by: wersch on September 02, 2017, 05:34:16 pm

I think the easiest and best solution for you is to buy a external Peak & Hold driver, then you have the pwm output free for dbw.


This is one example:
https://www.diyautotune.com/product/41-peak-and-hold-injector-driver-with-subharness/