VEMS Community Forum
Technical => Fuel Injection => Topic started by: Seight-v8 on February 10, 2018, 06:39:10 pm
-
hello all,
After 3 years away from vems with my engine getting rebuilt, I've started looking at the settings again, before the next re-start.
Looks like a lot has changed, and I just want to clear a few things up, and make sure my settings are correct.
What is correct with the injector settings order, as the help seams to say opposite to the settings page.
As the red arrow points down, but the help says the page is traversed backwards!!!!!.
So if my firing order is 1,8,4,3,6,5,7,2, how do i set the settings?
(http://i66.tinypic.com/2hzlo91.jpg)
cheers
scott
-
The firing order is the arrow.
The real cylinder order is there just as a guide, not a ECU setting.
What Vemstune is that?
-
cheers
looks like the order I had is correct then, just thought I better ask, as least I know its ok.
should be the latest version of vemstune, with any updates applied.
scott