VEMS Community Forum
Technical => Wiring & Sensors => Topic started by: devilke on August 20, 2008, 08:46:49 am
-
i have 6V on 28 and 29 pin, and changing value of 7-7,5V with running engine.
thx for the help.
-
Yet the ECU still functions correctly?!?
You may have a faulty 7405 (Voltage regulator)
-
i opened the ecu today, http://kepfeltoltes.hu/080820/DSC07385_www.kepfeltoltes.hu_.jpg i have found that.
where i can found the voltage regulator on the board? how could i check it. i think its bad......
the car is running with that ecu. the tps doesnot work, and sometimes i have spark fault. (knocking or big afterstark) maybe because the hall. (that have 3.3V and that 7.5V)
-
Best to talk to the people you bought it from.
-
its not possible thats why i am here. he made a peace of shit work so i have the fix the faults.
-
I am not trying to be dismissive of the problem you have but as you're in Hungary you will get much better from the Hungarian guys:
http://www.kulinpapa.hu/
http://pwracing.atw.hu/